Large Amusement Facilities Kids And Adult Indoor Playground Equipment
6000Square Meters Customized
Electrostatic baking painting
A. Plastic parts:LLDPE engineering plastics
B. Tube:Diameter 48mm and thickness:1.8-2mm hot galvanized
C.Soft parts:Three-ply board wood inside,pearl wool middle outside with 0.45mm pvc thickness coating
D:Mat 100*100*2cm the material is EVA mat
Slide, Bridge, Tube Crawling, Punching Bags, Hanging Ball and etc.
we supply enginner for install,or send installation manual
Daily inspection of Indoor Playground Equipment
First, the appearance of soft pack
Many devices are applied to soft packs, which bring colorful colors, soft and comfortable touch to the device, and most importantly, it can effectively cushion the impact of the child and prevent the child from being injured. However, during the daily operation of the park, the soft bag may be worn or scratched by sharp objects, revealing the hard material inside (multi-layer MDF or galvanized steel pipe). Not only does it affect the appearance of the device, it gives a bad impression, and it is easier for children to be bumped. Therefore, if the soft bag is found to be damaged during daily inspection, even if it is repaired.
Second, the equipment screws are firm
During the use of the device, it is affected by the child's push and pull and bouncing for a long time, which may cause the screw to loosen slightly. As a connection between various parts of the equipment, the screw can be said to be very important. Once a certain screw is not stable, it may cause the equipment to shake, and some places are relatively fragile, posing a safety hazard. Therefore, during daily inspection, the screws in the critical area should be reinforced to prevent the screws from falling off.